BJFGW - XD-6125-T (FORMRLY-METEX TIN LEAD REMOVER)

  • MSDS: BJFGW
  • Manufacturer: MACDERMID INCORPORATED
  • Product Name: XD-6125-T (FORMRLY-METEX TIN LEAD REMOVER)
  • National Stock Number: 6850-00N011517
Product Identification

Product ID:XD-6125-T (FORMRLY-METEX TIN LEAD REMOVER)
MSDS Date:04/11/1990
FSC:6850
NIIN:00N011517
MSDS Number: BJFGW

Responsible Party
MACDERMID INCORPORATED
526 HUNTINGDON AVE
WATERBURY, CT 06708
US

Emergency Phone: 203-575-5700;313-644-5626 (SUP DAT)

Info Phone: 203-575-5700

Cage: IFK56

Contractor
MACDERMID INCORPORATED
WATERBURY, CT 06708 US

Telephone: 203-575-5700,313-644-5626

Cage: IFK56

Ingredients

HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: <5%

OSHA PEL C 5 PPM

ACGIH TLV: C 5 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WILL BURN EYES,SKIN AND MUCOUS
MEMBRANES.INHALATION WILL BURN RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATE AND BURN.SKIN:IRRITATE AND
BURN.INGESTION:N/K .INHALATION:WILL IRRITATE AND BURN MUCOUS
MEMBRANES.WILL BURN RESPIRATORY SYSTEM.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.CONTACT
PHYSICIAN.SKIN:WASH WITH SOAP AND WATER.INGESTION:GIVE WATER,INDUCE
VOMITING.CONTACT PHYSICIAN.INHALATION:REMOVE TO FRESH AIR.CONTACT
PHYSICIAN IF IRRITATION OCCURS.

Fire Fighting

Flash Point:NONFLAMMABLE
Extinguishing Media:AS APPROPRIATE FOR SURROUNDING MATERIALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:UNKNOWN.HAZARDOUS DECOMPOSITION
PRODUCTS:CHLORINE GAS.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE CLOTHING.NEVER DISCHARGE
DIRECTLY INTO SEWERS OR WATERWAY.SOAK UP INTO INERT ABSORBENT
MATERIAL AND COLLECT FOR DISPOSAL IN PLASTIC RECOVERY DRUM.FLUSH
RESIDUE WITH WATER TO CHEMICAL D RAIN.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:STORE IN COOL,DRY AREA OUT OF DIRECT
SUNLIGHT.
Other Precautions:AVOID EYE AND SKIN CONTACT.ALWAYS WASH CLOTHING
BEFORE REUSE.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR ACID FUMES.
Ventilation:LOCAL EXHAUST NECESSARY.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES/FACESHIELD.
Other Protective Equipment:RUBBER BOOTS/APRON.
Work Hygienic Practices:ALWAYS WASH CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EMER TEL NO:MFSA EMER 24 HR HOTLINE.ROUTES OF
ENTRY:INHALATION/SKIN/INGESTION .

Chemical Properties

Boiling Pt:B.P. Text:>212F,100C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:1.04 (WATER=1)
Solubility in Water:COMPLETE
Appearance and Odor:YELLOW LIQUID,HYDROCHLORIC ACID ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ALKALIES,STRONG OXIDIZERS.
Hazardous Decomposition Products:CHLORINE GAS

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DISCARD TO CHEMICAL WASTE
TREATMENT SYSTEM.SUBJECT TO SARA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.